Our country is now in a wave of environmental protection, especially in response to the increasingly stringent relevant emission standards and air pollution control. The emergence of dust removal bags has promoted the development of the filter material industry, and its high temperature Among them, the development of aramid and polysulfide is very broad. Correctly selecting a dust bag suitable for the corresponding dust temperature is the key to the bag.
The fabric and design of the dust bag should strive for high filtration efficiency, easy dust removal and long-lasting use. The selection of dust bag is very important, it directly affects the dust removal effect of the dust collector. The selection of dust bag should be based on the following aspects: gas temperature, humidity and chemical properties, particle size, dust concentration, filtration wind speed, cleaning Dust methods and other factors.
ptfe coated filter cloth has the characteristics of high peel strength, large air permeability, low resistance, concentrated and uniform pore size distribution, etc., as Dust bag or pleated dust filter cartridge, installed in the dust removal equipment, will quickly and well intercept fine dust measured in microns, with a dust removal efficiency of more than 99.99%. The dust deposited on the surface of the ptfe coated filter cloth is easily removed, which greatly reduces the clogging of the filter material. Only the gravity of the dust itself can naturally shed part of the dust with larger particles. , thus the rising speed of the filter material resistance is greatly slowed down, which not only reduces the operating resistance, but also improves the dust removal performance, which can extend the cleaning cycle, reduce the number of cleaning times, require less cleaning power, and save energy consumption. At the same time, it reduces the wear on the filter bag and related components, further reduces the maintenance workload, and solves the problem that conventional filter materials cannot have high dust removal efficiency and high stripping rate at the same time.
PTFE coated filter clothThe manufacturer has a full set of advanced production equipment, advanced clean rooms and independent Composite slitting workshop, interested parties can enter the store and contact us.
</p
