China Fabric Factory Fabric News ptfe reusable mask filter membrane has good uniformity

ptfe reusable mask filter membrane has good uniformity



The PTFE reusable mask filter membrane is used as the protective layer. The fiber diameter is only a few tens of nanometers (90 nanometers for the new coronavirus). It directly use…

The PTFE reusable mask filter membrane is used as the protective layer. The fiber diameter is only a few tens of nanometers (90 nanometers for the new coronavirus). It directly uses the principle of physical isolation to filter viruses with hard core, with a filtration efficiency of more than 99% and excellent filtration performance. The excellence makes us feel more at ease.

Filter material fluctuations come from two sources. First, electret melt-blown and electrostatic cotton mainly provide filtration efficiency through static electricity, and static electricity itself has attenuation characteristics. Therefore, as time goes by, it may bring about filter material products. Reduction in filtration efficiency.

This point has been recognized by many people, but few people pay attention to the second point.

This is the difference between the products themselves, or product uniformity, which is the size of the deviation.

The surface of the ptfe reusable mask filter membrane is composed of 100~200 nanofibers staggered into holes. After the fiber diameter is reduced to the nanometer level, the surface area increases, the pore size becomes smaller, and the pore volume increases, which can effectively block PM2.5 .

It also has a fibrillar microporous structure with a porosity of more than 88%, 1.4 billion micropores per square centimeter, and a pore diameter range of 0.1μm-0.5μm. It has the characteristics of high barrier efficiency, long service life, lightness and breathability. New direction for future mask development.

It is an environmentally friendly material manufacturer specializing in R&D, production and sales of ptfe reusable mask filters.

Our company is different from other manufacturers.

Our company can customize according to user’s requirements.

The optimized combination of key technical parameters such as speed ratio, pressure ratio, operating temperature, etc. can realize online control of air permeability, thickness and void ratio according to the ratio and pore-forming medium to meet the different requirements you need. .

Interested parties can enter the store for consultation.

</p

This article is from the Internet, does not represent 【www.factory-fabric.com】 position, reproduced please specify the source.https://www.factory-fabric.com/archives/13854

Author: clsrich

 
TOP
Home
News
Product
Application
Search